Optimum – Free the artist in you!
• The perfect tip with just a flick
• Perfectly balanced.
• Replaceable Premium Kolinsky sable Brushtips.
SDi Plastic Burnout Post
Offers you a quick and economical method of perfecting cast pores and cores.
Borax
Melting flux. For all casting alloys with a solidus temperature less than 1000 °C / 1832 °F.For open flame or induction melting. By applying Borax, oxidation of the alloy during melting is avoided. Glazing of crucibles with Borax yields excellent casting results.
Item No.
080 2322 can of 100 mlBoric
Galileo Dip Pot Wax is not just a dipping wax, but also a perfect margin wax all in one. “Ash Free” / Melting temperature
is 1650 F.
Item No.
460 – G Green – (Approx. 3.5 oz)
460 – Y Yellow – (Approx. 3.5 oz)
Galileo Pressable Wax is translucent and “Ash Free”. Similar to our modelling wax, it is an exceptional wax for pressable crowns, inlays and frameworks. It’s chatter-free carvability creates smooth contours
for the most intricate work.
Item No.
469 (bone colour) 2.5 oz tin
Meteor MP
DegussaMeteor MPUniversal blowtorch system for the melting and soldering of alloys. Meteor is safe to handle and ensures consistent, high quality results. Blowpipe Meteor O: For casting, universal and bonding alloys – Melting with oxygen-propane.Blowpipe Meteor A: For casting alloys – Melting with compressed air-propane.Blowpipe Meteor O-NP:
For non-precious alloys – Melting with oxygen-propane. Blowpipe L: For general soldering with oxygen-propane.
Item No. Name
0805 2167 Universal handle
0805 2164 Blowpipe Reg “O”
0805 2168 Blowpipe “O-NP”
0805 2165 Blowpipe “A”
0805 2166 Blowhead “O”
0805 2169 Blowhead “O-NP”
0805 2184 Blowpipe “L”
Boric Acid
High fusing flux. For all casting alloys with a solidus temperature greater than 1000 °C / 1832 °F. For open flame or induction melting. By applying Boric Acid, oxida-tion of the alloy during melting is avoided. Glazing of crucibles with Boric Acid yields excellent casting results.
Item No.
0805 2176 vial of 80 ml
Stopor
Zirconia based anti-flux paste. Stopor limits the spreading of the
liquid solder to the immediate vicinity of the joint, thus contamination
of attachment and occlusal surfaces is prevented. By applying
Stopor to soldering joints in the vicinity of the porcelain, discoloration
is avoided. Stopor is excellent in covering oxidation-sensitive
medium and low-precious metal alloys. Grinding and polishing time
of the surfaces is therefore greatly reduced.
Item No.
0805 2181 Stopor, 10.0 g
AESTHETIC WAX
• ideally suited as a wax up
• for modeling crowns and bridges
• for clean and smooth surfaces
• does not smear
• can be milled
• free of titanium dioxide therefore burns
• without residues
Item No.
974115 (white) 45g. Can
Wax Wire Roll of 250 g, x 0,4 mm
0805 2150 Creativ light beige 66 °C hard Aesthetic wax-up
0805 2151 Creativ dark brown 66 °C hard Contrast
0805 2154 Special grey 66 °C hard Wax-up and C & B work
0805 2148 Margin red 67 °C average Frist layer
0805 2153 Position orange 20 – 30 °C flexible Positioning
0805 2152 Tecno green 64 °C very hard Milling, machining
0805 2143 Wax Wire blue 66 °C hard Spruing
CM soldering paste
For flame soldering of precious metal alloys.
Item No.
080 229
ABF-Wax
ABF waxes are characterized by their unique composition,
that guarantees exceptional properties during use:
Creativ
light and dark: As their name indicates these waxes make it possible
to create the aesthetics, that will provide your Wax-up with
character. A light version to ensure basic colouring and a dark
version to generate typical shade in the fissures. In the liquid state
these waxes still remain opaque.
Special
This modeling wax has a pleasant texture, is very clean and allows
excellent visual control. This wax is ideal for use with pressable
ceramic systems.
Tecno
This extra hard milling wax, offers excellent resistance to creaks and
chips at the edges, and is ideal to be used with or without rotary
instruments.
Universal
The universal wax per excellence. It can be easily used for any type
of modeling, in particular for the construction of occlusal surfaces,
coronal walls and armatures.
Margin
This extremely stable wax is typically used for the first layers of the
coping and the secondary parts of the milling technique. Its name
is there to indicate its greater stability at the marginal edge and
ensures a high degree of precision of the coping.
Position
This positioning wax has a high degree of adherence, offers an
excellent solution when attaching the spruing elements. An ideal
adherence is obtained when used at a temperature above 20 °C.
SHERAFINA-RAPID
Investment for crown and bridge technique
• suitable for all high gold up to non-precious alloys
• expansion is easy to control
• for shock heat process and for the traditional slow
heating process
• very fine and dense consistency
• for castings with very smooth surfaces
• for an exceptional precise fit.
Item No.
201020 3 kg (50 sachets of 60 g)
SHERACAST
Robust chrome investment
– robust quality
– for shock heat process and for the traditional slow heating pr ocess
– for silicone and gel duplication
– for chrome castings with a very pr ecise fit
– for extremely smooth surfaces
– for very stable margins
– the oxides will be bonded when devesting shock heat pr ocess
– binds the oxides
Item no.
202021
Unit
20 kg (50 sachets of 400 g)
SHERALIQUID
Mixing liquid
• special expansion liquid
• for any kind of work requiring a greater expansion
• use only in conjunction with SHERALIQUID
• sensitive to cold
Item No.
208010 1 Litre
208011 5 Litres
DUOSIL EXPRESS
Shore hardness A 22
• colour: yellow
• medium hardness
• shortened setting time: 9 minutes
• due to the shortened reaction time it
is essential to mix by hand
• enables fast working
• for stones and investments
Item No.
208010 1 litre
Sheraliquid Extra
Mixing liquid
• special expansion liquid for all SHERA investments
• can be mixed with distilled water according to the
recommendations given for the investment used
• sensitive to cold
201 Post Solder
Melting point 1200-1400°F/ 649-760°C to be used for post-soldering Tilite Alloys and soldering Tilite Alloy to ceramic precious or semi-precious alloys as well as full cast alloys.
Graphite paste
For fitting of secondary parts as well as attachments after thermal treatment.
Item No.
080241
CM soldering investment
For the construction of soldering blocks for soldering before
and after firing.
Item No.
080 181 Can containing 4 kg
SHERAMASTER
Impression and surface tension release agent
– for silicones, polyether impressions and waxes
– increases the flow characteristics of stones / plasters
in impressions
– prevents the formation of bubbles ar ound wax-ups
in investments
– alcohol, formaldehyde and solvent fr ee
– neutral odour
Unit
1 litre
Item no.
709070
Shera Maximum 2000
Unit -18 kg
Item no.
101015-70 (white) (4 x 4.5 kg)
101013-70 (white) (1 x 4.5 kg)
Shera Premium
Unit – 20 Kg
Item no.
101070-14 (yellow)
101070-18 (golden brown)
101070-30 (light green)
101070-70 (white)
Superhard Stone
Item no.
101155-25 (light grey)
101155-82 (cream white)
101153-25 (light grey)
101153-82 (cream white)
Polyurock
Polyurock is a dual component model resin, offering excellent mechanical properties. High hardness value and strong inter-molecular cohesion bonds produce models that benefit the dental technician with
models less effected by shock impact from bench-work and during transportation. Polyurock is compatible with alginates, hydrocolloids, various types of silicones, and many other impression materials. Polyurock can also be supplied with Polyurock release spray which should be used with polyethers (Impregum), vinyl polysiloxanes, thio-elastomers, metals (posts, implants, attachments), and plastics (burn-out posts, Zeiser plates, Model Trays, etc.).
MS1 – Die Sealer and Model Hardener
• Protects margins from chipping and abrasion.
• 0 μm ensures zero layer build-up.
• Fast 15-second drying time.
• Scanable.
7177 MS1 Master Sealer/Hardener, Pens, ( 3 pcs.)
Replace Die Lube, Ceramic- and Composite Separators.
• Non contaminating.
• Non-Oily for vital looking ceramic restorations.
• 0 μm layer, fast 10-second drying time.
7184 MS3 Master Die Separator, Pens, 10ml,( 3 pcs.)
SHERAISOLEX
Isolating agent – sponge
–isolates stone / plaster against wax
–isolates wax against wax
–isolates alloy against wax
–very thin and homogeneous isolating layer
–simple application
Item no. Unit
701087 20 ml can
SHERARELAXA
Impression and surface tension release agent
• for alginate, polyether and silicone impressions
• improves the flow properties of stones and investments
• releases surface tension of waxes
• bubble free models without any residues
• very good wetting properties
• formaldehyde and solvent free
• especially effective and economical in use
Item no. Unit
709179 50 ml incl. spray nozzle
709175 500 ml
Plungers for Pressing
Talladium Disposable Plungers are specially
designed to uniformly cool with the mould,
eliminating thermal shock that could possibly
cause cracked cores or veneers. The
plungers are double red for added strength
and reliability, and can be used for all pressable
ceramic systems. There is no need
to preheat these disposable plungers…just
place it in the ring immediately!
Order No.
12-1902-P Disposable Plungers – E max 13 mm (50)
12-1900-P Disposable Plungers – 12 mm (50) 2gr
Stick-It
Stick-It is a custom refractory peg material that
comes in a pack of 3-12cc syringes. It stabilizes the
restoration by syringing the material into a crown
which forms a more secure peg. Stick-It can be used
to repair cracked pressable cores and all-ceramic
margins. It even holds veneers in place during the
stain and glaze firings and can also be used to fill
behind Platinum foil for repairing holes. Stick-It is
freeze stable and can withstand temperatures up to
2,300°F (1,260°C)
Item no. Unit
12-715 Stick-It Firing Support Peg. 12ml, 3 pcs.
VersaGlue
Performance extended
• Reliably glues stone, metal, resin and ceramics
• Precise application for minimal waste
• Non-clogging application tip
• Extended shelf life
SureFit
Item no. Unit
2025 Versaglue PX-4, thin, 28g.
2026 Versaglue PX-40, medium, 28g.
2027 Versaglue PX-400, thick, 28g.
Dura Pattern LC
Efficient modeling gel.
• One-component light cure resin.
• Easy modeling gel for implant jigs.
• Replaces wax for copings.
• Burns out clean and residue free.
Item no. Unit
3000 DuraPattern LC Flow Blue 3×3 g
HARVEST ModelSep
Precisely separated – dental stone separating agent
• Offers clean separation.
• Leaves no film.
• Dries on contact -no drying time required.
• Works on all stones incl. resin enhanced stones.
7066 Harvest Model-Sep, 946ml refill
7065 Harvest Model-Sep, 8oz Spray
SuperPeg II
Ultimate Ceramic Firing Paste – Ped Putty
Conveniently stabilizes ceramic restorations on firing pegs.
Zero clean-up is required – just a blast of compressed air is enough.
Eliminates divesting by way of scraping out and sand blasting.
No drying time is required.
Item no. Unit
8510 Super Peg ll, Custom Firing Support, 12ml, 4 pcs.
Sheragingival
• for gingival masks for model preparation
• addition cure silicone
• special colour with natural appearance
• easy mix due to cartridge system
• easy cut and trim
• for the direct and indirect use
• Shore hardness A 70
Item no. Unit
960101 Set consists of: 2 double cartridges
each of 50 ml, 12 mixing nozzles
pink, 50 ml SHERASEPARAT
(separating agent)
Sherascan-Wax
• modelling and block out wax for
• CAD/CAM technique
• laser and light opaque
Item no. Unit
974960 (beige) 45 g tub
202 Hi Tech Pre-Solder
Melting point 2150°F / 1177°C.
High-Tech Pre-Solder was made
for Tilite Alloys. This solder is very
easy to use. It is heat stable and
will endure multiple porcelain
firings without warping.
702 Hi-Tech Flux 10 gm
This pink flux is used with the
Hi-Tech pre-solder. Keyed to
eliminate the oxides that are
created when soldering the
Tilite alloys.
Cerafirm
With no limits, now anything is possible with ceramics.
Introducing CeraFirm, the ultimate mixing system for all ceramics.
Stabilizing additive gives you the control you need for high detail areas.
Achieving high quality ceramic build-ups has never been so easy.
Item No. Unit
201-0000 CeraFirm Fluid 250 ml
201-1000 CeraFirm Add 2 x 3.5 ml Syringes
201-2000 CeraFirm Kit 1 x 3.5 Syringe & 250 ml Fluid
Golden Eagle
Our Golden Eagles are infused with a high percentage of diamond and contour feldspathic
ceramic beautifully. We also removed the yellow centers to give you more usable disc. Golden
Eagles are available in 26mm knife edges, 17x3mm wheels, and 2 point sizes.
Golden Eagle
Our Golden Eagles are infused with a high percentage of diamond and contour feldspathic
ceramic beautifully. We also removed the yellow centers to give you more usable disc. Golden
Eagles are available in 26mm knife edges, 17x3mm wheels, and 2 point sizes.
Golden Eagle
Our Golden Eagles are infused with a high percentage of diamond and contour feldspathic
ceramic beautifully. We also removed the yellow centers to give you more usable disc. Golden
Eagles are available in 26mm knife edges, 17x3mm wheels, and 2 point sizes.
Golden Eagle
Our Golden Eagles are infused with a high percentage of diamond and contour feldspathic
ceramic beautifully. We also removed the yellow centers to give you more usable disc. Golden
Eagles are available in 26mm knife edges, 17x3mm wheels, and 2 point sizes.
ZMax Disilicate
• Extra high diamond impregnation
• Extremely high abrasion, minimal
pressure necessary.
• Lowest possible heat generation
• High durability – great economy
Green State Zirconia Finishing Kit
Our green state finishing kit offers several unique instruments that assist in preparing
your pre sintered zirconia restorations
6 Hand Piece Diamonds for anatomical adjustments.
Each diamond is fine grit and has a unique particle
shape for improved results.
• 1 HE Silicone Wheel # 501 for sprue and flash removal.
• 1 HE Silicone Point # 504 for refining difficult areas.
• 1 GS Contour A 2 step “finessing tool” for making
final adjustments.
• 1 GS Contour Mini, 1 GS Contour Bullet 1 GS Contour Point,
and 1 GS Contour Knife Edge.
RA Assortment
2 RA RedBerry Coarse
2 RA BlueBerry Medium
4 RA GoldenBerry Fine High Shine
Item No.
ZR RA KIT
ZR RA/ZDA KIT
2 RA RedBerry Coarse
2 RA BlueBerry Medium
4 RA GoldenBerry Fine High Shine
7 FG For Adjusting
2 FG For Crown Removal
Allbright Polishing Paste for Ceramics,
Zirconia and Lithium Di-Silicate
• Extra high diamond particle content
• Extra greasy consistency – never felt
before adhesion while polishing.
• Used with a felt mob applying slight pressure,
allowing texture to be sustained.
Item No. Unit
113-1000 11 g
Legabril Diamond
Legabril Diamond is a fine polishing compound
containing diamond particles, for all precious and
non-precious dental alloys. Particulary suitable
for high gold dental alloys. Legabril Diamond can
also be used to polish ceramics and composites.
Time saving application in the lab.
Item No.
0805 2307 Legabril Diamond 50 g
SHERADIALUX
Diamond Paste
• brilliant high-lustre finish in no time
• for zirconia, acrylics, alloys, ceramics
Item No.
954104 approx. 300g
SHERAPOL 701
Pre- and high-lustre polishing paste
• colour: green
• for all alloys, ceramics and composites
• especially for gold and titanium
• very fast and efficient
• excellent shine
Item No. Unit
954101 approx. 300 g
SHERAPOL 704
Pre- and high-lustre polishing paste
• colour: red
• for all alloys
• especially for chrome and non-precious alloys
• saves polishing time
• very economic
• excellent shine
Item No. Unit
954104 approx. 300 g
SHERAPOL 705
Universal polishing paste
• colour: white
• for all alloys, acrylics and ceramics
• polishes chrome dentures in one step
Item No. Unit
954105 approx. 300 g
Alloy & Titanium
Diamond Cutting Discs
• for all alloys
• glass-fibre reinforced
• good price-performance ratio
Item No. Disc 1
08000101 50 Pieces
22 x .3 mm (50,000)
Medium Diamond Particles
Preferred for lithium disilicate contouring
Item No.
B612-BLUM BlueBerry
26mm Knife Edge
B6127 Mini BlueBerry
17mm x 3mm Flat Edged
Alloy & Titanium
Diamond Cutting Discs
• for all alloys
• glass-fibre reinforced
• good price-performance ratio
Item No. Disc 5
08000105 50 Pieces
22 x .2 mm (50,000)
CERAMIC Diamond cutting discs
• for ceramic
• glass-fibre reinforced
• high cutting performance
Item No. Disc 2
1021816 10 Pieces
20 x .3 mm (50,000)
Item No. Disc 6
1031988 10 Pieces
20 x .2 mm (50,000)
Diamond cutting discs
• for chrome casting and
non-precious metal
• improved quality with increased
cutting power
• low heat development
• extreme long service life
Item No. Wear-ever
630 50 Pieces
35 x .7 mm
Diamond cutting discs
• for chrome casting and
non-precious metal
• improved quality with increased
cutting power
• low heat development
• extreme long service life
Item No. Disc 3
08000103 20 Pieces
40 x 1.0mm (35,000)
Diamond cutting discs
• for chrome casting and
non-precious metal
• improved quality with increased
cutting power
• low heat development
• extreme long service life
Item No. Disc 4
08000104 20 Pieces
40 x .5 mm (38,200)
Super Fine Diamond Particles
Preferred for high shine on zirconia or lithium dislocate.
Item No.
B610 GoldenBerry
26mm Knife Edge
B6107 Mini GoldenBerry
17mm x 3mm Flat Edged
Coarse Diamond Particles
Preferred for zirconia contouring
Item No.
B611-REDC RedBerry
26mm Knife Edge
B6117 Mini RedBerry
17mm x 3mm Flat Edged
Diamond Disc ZR19
Item No.
ZR19X22 19mm x 22mm
ZR19X24 19mm x 24mm
ZR19X26 19mm x 26mm
Diamond Discs ZR22
Item No.
ZR22X22 22mm x 22mm
ZR22X24 24mm x 24mm
ZR22X26 22mm x 26mm
SHERAHARD Rock
Super hard stone, superior quality
– good thixotrope quality and very good flow characteristics
– can be scanned with several systems
– ideal for plastic basing systems
– extreme easy processing
Unit
18 kg
(4 x 4.5 kg)
Item no.
101025-18 (golden brown)
101025-20 (golden yellow)
101025-84 (light yellow)
101025-85 (light green)
Unit
4.5 kg sachet
Item no.
101023-18 (golden brown)
101023-20 (golden yellow)
101023-84 (light yellow)
101023-85 (light green)
100 : 20
300
320
70
10,150
< 0.10
5.0 – 6.0
approx. 30
Technical specifications
mixing ratio (p : dw)*
hardness after 2 h (MPa; N/mm 2)
hardness after 24 h (MPa; N/mm 2)
compressive strength after 1 h (MPa; N/mm 2)
compressive strength after 1 h (psi)
setting expansion after 2 h (%)
working time (min)
end of setting (min)
*mixing ratio = powder : distilled water
Recommended for: implant technique
sectioned models
master models
opposing models
static models
Follow Us!